Concrete mailbox can be a nice complement to your farm. Not only are brick mailboxes very durable, they also improve the look of your home. Tile mailboxes are less likely to be damaged by bad weather, and are not primary targets for vandals. As long as you do not mind getting a little dirty, you can build your own brick mailbox. Make sure you do not need any kind of building permit from the municipality or permission from the post before you start your project.
20 Photos Gallery of: Building Concrete Mailbox
Remove your old mailbox. Dig something concrete into the ground with your shovel. Dig a square hole to the foot of the new concrete mailbox. Make sure the hole is at least 8 inches deep and about 24 inches wide and 24 inches long. Suitably defeat the bottom of the hole with your shovel. Use your level to make sure the ground is flat. Mix a 4.54kg. Bag of fast-drying cement with water in a wheelbarrow. Use the recommended amount of water when mixed. Stir the mixture with the spade. Fill the foot with cement. Use your morsel to smooth the surface of the cement. Make sure the surface is flat with your level.
Let the cement cure for a week before proceeding to the next step. Set two cement blocks due to concrete mailbox. Make sure the blocks are centered as best as you can. Mark the positions where the blocks will be seated with a carpentry pen. Pick up cement blocks. Apply a thick layer of mortar to the lines you selected. Put the blocks back down on lines and mortar. Press down when the blocks are on the right side in side mode.Incoming search terms: building a brick mailbox, dolphin mailbox for sale, dolphin mailbox post